FO clamp connector SC-RJ metal ferrule for 200/230µm PCF cable with protection boot
This connector, designed for 200/230µm PCF fiber uses an assembly without crimping and glueing. A patented clamp system integrated into the connector body holds the PCF fiber, the strain relief and the cable jacket in place after assembly. Also, it is possible to disassemble the connector and reuse it several times. This big advantage makes it easy to repeat an assembly if the demanded optical parameters are failed after finishing. Additionally, there is no need for expensive tools like heat oven or crimp pincers and an enormus time saving while no crimping, glueing and heat cureing is needed. Fiber endface preparation is done by hand thru scribing and breaking or, to get repeatable results, using the special designed fiber cleaving tool from Ratioplast-Optoelectronics.
 |
|
| Connector type |
SC-RJ |
| Ferrule type |
metal, PCF
|
| Outer diameter |
2.5 mm |
| Inner diameter |
235 mm |
Protection class
|
-
|
Assembly type
|
clamping
|
| Accessories |
910FW230SC001 Cleaving tool for SC fiber optic clamp connectors 200/230µm PCF
910AB00100001 Fiber stripper
910PS0SC00001 Polishing disc
910PB00100001 Polishing film, grain size 1000
|
| Data sheet |
 |
| Ordering information |
902SS201SRK01
for cable diameter 2.2mm
902SS202SRK01
for cable diameter 2.5mm
902SS203SRK01
for cable diameter 3.0mm
|
| Addtional information |
By using a duplex adapter the connector can be a duplex SC standard version connector |